Poly Edge E220 Phone Guide

Table of contents

Your Desktop Device

Voicemail Indicator

The indicator is on the upper right corner of the phone. The light flashes red to indicate new messages.

Softkeys

The functions for the soft-key buttons appear directly above them on display. Their functions are context-sensitive, which means the function of the soft-keys changes depending on your current activity. For example, if you are conferencing, the soft-keys display functions related to the conference feature.

Home Button

The Home button is located to the right of the navigational keys. Press this button from any screen to return to the Home screen.

Navigation Button

By pressing left or right, you can scroll through the options and lists on the display up or down. To select an item, press the OK button in the center of the four-way navigation arrows.

Headset, Speaker, and Mute Keys

These keys are located along the right edge of the phone and used as they are stated.

Volume Key

The volume key is located at the bottom of the phone below the dial pad. This key adjusts the volume of the handset, headset, speaker, and phone's ringer.

Transfer Button

This button will transfer active calls to another number.

Message Button

This button gives you access to your voicemail messages.

Hold Button

This button will place a call on hold.

Back Button

This button cancels actions or returns to the previous screen when pressed.

Line Keys

These buttons indicate the status of your lines and associated activity. The backlighting informs you when a line is idle, ringing, in use, on hold, or disconnected.

Use Your Desktop Device

Place a Call

First, dial the number. Then, pick up the handset. For hands-free speakerphone – dial number, then press the Speaker button or press Dial softkey.

Answer a Call

Pick up the handset. For a hands-free speakerphone, press the Answer soft key or press the Speaker button.

Dial a Number From Your Directories

Press the Home button, and then select Directories. Proceed to Contact Directory. Select the contact, then the number from the Contact Information Screen, and then press Ok.

Dial a Number From Your Recent Calls

Press the Home button, then select Directories. Proceed to Recent Calls. Press the Sort softkey to sort and order calls; Press Type to display only specific calls. Select a call record to call the person.

Hold and Resume

From Lines, Calls, or Active Call view, press the Hold softkey or function button. To retrieve the call, press the More softkey and press the Resume softkey or Hold function button again.

Call Park / Call Retrieve

Call Park places a call on hold so that other users assigned to Call Park service can retrieve that call from any phone in the office.

To Park: Press the Park softkey (the Park softkey does the same thing as Hold and *68). Enter the extension where the call will be parked, and then press #.

To Retrieve: Press the Retrieve softkey. Enter the extension where the call was parked then #.

Transfer a Call

Announced Transfer: Press the Transfer button to place an active call on hold. Dial the number where you want to transfer the call. Once the third-party answers, announce the call and press the Transfer button.

Blind Transfer: Press the Transfer button to place an active call on hold. Press the Blind softkey (If you don’t see Blind, press the More softkey,) Dial the number where you want to transfer the call.

Transfer to Voicemail: Press the Transfer button to place an active call on hold. Next, enter *55 and dial the party’s extension, then #.

Mute 

Press the Mute function button to silence your phone’s mouthpiece and speaker. To turn mute off, press Mute again.

Voicemail

Press Messages from home view or press the Messages function button. Then press the Connect softkey. Your phone will ring your voice portal. Enter your passcode, then #. Follow the voice prompts to listen to delete/save messages.

Call Forward

Press the Forward softkey from the home or lines view. Select the forwarding type and enter the number to forward your calls to. Then press Enable softkey. Calls Forwarded will be displayed on the LCD screen. To turn off Call Forwarding, press the More softkey and then press the Forward softkey. Select the forwarding type and press Disable softkey. 

Visual Call Park

Visual Call Park is an optional Unified Communications functionality. Once requested, the appearance of the available Visual Call Parks is represented in the line keys / Busy Lamp Field (BLFs) on every phone that’s in the customer’s location. It is either vacant or occupied (with a parked call).

Everyone on the site sees the same parking spots and their status (whether a call is parked or not), and can either park a call in a vacant spot, or retrieve a call from an occupied spot.

For consistency, all phones in the location must be provisioned precisely the same way, in this case being the Poly Edge 220. The client must also select between 4 parking spots (up to 12 phones per site), or three parking spots (up to 16 phones per location).

To use Visual Call Park, while on an active call:

1. Press the Home button, so the Line Key view is displayed. Here you will see your available Visual Call Park spots.
2. Proceed to park the call at any vacant call park spot by tapping the VISUAL CALL PARK (VCP 1) spot.
3. Once this is complete, the call will be parked and indicated by a white phone icon.
4. Once the call is parked, everyone in the location can see the parked call occupying the parking spot.
5. Any user can then retrieve the call to his / her line freeing up that spot.
6. To retrieve the Parked Call, press the corresponding line key.

Pagination 

To access Pagination options, press and hold the Ellipses button.
Options include: Add New Page, Remove Empty Lines, and Make Page 1 as Default. 

Select the pagination option you’d like to use. By default, with no pages added, an instructional page appears describing how pagination works when you press it or press and hold. 

Once you add enough line key items on one page, a new page is automatically created where you can choose to delete to add a page later or continue adding contacts. If you have a full page and are ready to add a new one, press and hold the pagination button to add a page.

Bluetooth

You can pair your Poly Edge phone with a mobile device or headset and use it to place, answer, and manage calls. 

To pair your headset to your Poly Edge E220 phone:

1. On the phone, press the Home button.
2. Select Bluetooth. 
3. Select Manage Devices. 
4. Select Scan.

The phone will search for available BlueTooth devices within range to pair with them. Locate and select the name of the headset to pair with it. 

To reconnect a headset that was already paired:

1. Go to Menu and select Bluetooth.
2. Select Manage Devices. 
3. Choose your device name from the list of paired devices and press Connect.